Tech

ThrottleStop 9.5 Download | TechSpot

ThrottleStop has many options that you can use to bypass CPU throttling and a dashboard that shows you the current state of each thread on your CPU.

Some laptops use clock modulation and multiplier reduction to reduce the performance and power consumption of your computer. This is by design so that your computer runs with less cooling or your laptop runs on a power adapter that is not enough to fully power your laptop while also recharging its battery.

When using ThrottleStop, it is highly recommended that you monitor wall power consumption with a Kill-a-Watt meter or similar device and make sure you do not exceed the capacity of your power adapter. Using ThrottleStop to bypass these throttling schemes is at your own risk and may cause permanent damage to your power adapter or computer, or both, which may not be covered by your warranty.

What’s new

9.5:

  • Added support for Alder Lake desktop and mobile devices.
  • Improved performance when using Windows Defender Real-time.
  • The Disable and Lock Turbo Power Limit field has been replaced with the Lock MMIO field.
  • Added the ability to synchronize MSR and MMIO power limits.
  • Improved compatibility of SpeedStep and Speed ​​Shift with Windows.
  • Updated FIVR and TPL window themes and added support for large logos (up to 240×138 recommended).
  • Combined Turbo limits and Turbo groups in the FIVR window.
  • Added 800MHz voltage boost function for K-series CPU to improve undervoltage stability.
  • Reduced chance of BSOD looping when voltage is too low.
  • Added automatic activation of the PowerCut function when exiting sleep mode.
  • Disabled the function of launching the program after changing the profile to improve security.
  • Legacy Auto Mode Dual IDA Core 2 Duo.

9.4.6 Beta:

  • replaced the “Disable and Lock Turbo Power Limits” box with a “Lock MMIO” box.
  • updated FIVR and TPL window themes and added support for large logos (recommended up to 240×138).
  • merged Turbo Limits and Turbo Groups into the FIVR window.
  • added 800 MHz CPU voltage boost feature to improve undervoltage stability.
  • improved compatibility of SpeedStep and Speed ​​Shift with Windows.
  • Reduced chance of BSOD looping at too low voltage.
  • Added automatic activation of the PowerCut function when exiting sleep mode.
  • Removed automatic mode Dual IDA Core 2 Duo.

9.4.3 Beta:

  • Added support for Alder Lake desktop and mobile devices.

9.4.2 Beta:

  • Added the ability to synchronize MSR and MMIO power limits.
  • Disabled log folder dialog.
  • The function of launching the program after changing the profile is disabled.

9.4 Stable:

  • Fixed FIVR feature – disable and block MMIO for 11th generation processors.
  • Added separate reporting of MSR and MMIO power limits.
  • Added a function to disable all C states above C1.
  • Added access to the Ring Down Bin setting.
  • Included reasons for Skylake X restrictions.
  • Updated driver to improve security.
  • Fixed list of power plans for languages ​​other than English.
  • System monitoring timers used have been changed.

Source link

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button